View HCF4006B_132436.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HCC/HCF4006B
18-STAGE STATIC SHIFT REGISTER
.PERMANENT .FULLYSTATI .SHI .STANDARDI .QUI .I .100%TESTEDFORQUI .5V,10V,AND15VPARAMETRI .MEETSALLREQUI
REGISTER STORAGE WITH CLOCK LINE "HIGH" OR "LOW" ... NO INFORMATION RECIRCULATION REQUIRED C OPERATION FTING RATES UP TO 12MHz @ 10V (typ.) ZED SYMMETRICAL OUTPUT CHARACTERISTICS ESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE NPUT CURRENT OF 100nA AT 18V AND 25 C FOR HCC DEVICE ESCENT CURRENT C RATING REMENTS OF JEDEC TENTATIVE STANDARD N 13A, "STANDARD SPECIFICATIONS FOR DESCRIPTION OF "B" SERIES CMOS DEVICES"
EY (Plastic Package)
F (Ceramic Frit Seal Package)
M1 (Micro Package)
C1 (Plastic Chip Carrier)
ORDER CODES : HCC4006BF HCF4006BM1 HCF4006BEY HCF4006BC1
PIN CONNECTIONS
DESCRIPTION The HCC4006B (extended temperature range) and the HCF4006B (standard temperature range), are monolithic integrated circuits, available in 14-lead dual in-line plastic or ceramic package and plastic micro package. The types are comprised of 4 separate "shift register" sections ; two sections of four stages and two sections of five stages with an output tap at the fourth stage. Each section has an independent "single rail" data path. A common clock signal is used for all stages. Data is shifted to the next stage on negative-going transitions of the clock. Through appropriate connections of inputs and outputs, multiple register sections of 4, 5, 8, and 9 stages or single register sections of 10, 12, 13, 14, 16, 17 and 18 can be implemented using one HCC/HCF4006B package. Longer shift register sections can be assembled by using more than one HCC/HCF4006B. To facilitate cascading stages when clock rise and fall times are slow, an optional output (D1 + 4') that is delayed one-half clock-cycle, is provided (see truth table for output from pin 2).
June 1989 1/11
HCC/HCF4006B
FUNCTIONAL DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Symbol V DD* Vi II Pt ot Parameter Supply Voltage : HCC Types HC F Types Input Voltage DC Input Current (any one input) Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range Operating Temperature : HCC Types H CF Types Storage Temperature Value - 0.5 to + 20 - 0.5 to + 18 - 0.5 to V DD + 0.5 10 200 100 - 55 to + 125 - 40 to + 85 - 65 to + 150 Unit V V V mA mW mW C C C
Top Tstg
Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Symbol V DD VI Top Parameter Supply Voltage : HCC Types HC F Types Input Voltage Operating Temperature : HCC Types H CF Types Value 3 to 18 3 to 15 0 to V DD - 55 to + 125 - 40 to + 85 Unit V V V C C
2/11
HCC/HCF4006B
LOGIC DIAGRAM AND TRUTH TABLES (one register stage)
TRUTH TABLE FOR OUTPUT FROM PIN 2
D1 + 4 0 1 X CL - -/ - -/ -\ - D 1 + 4' 0 1 NC
TRUTH TABLE FOR SHIFT REGISTER STAGE
D 0 1 X
1 = HIGH 0 = LOW NC = NO CHANGE
CL -\ - -\ - /- -
D+1 0 1 NC
X = DON'T CARE = LEVEL CHANGE
3/11
HCC/HCF4006B
STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions)
Test Conditions Symbol Parameter VI (V) 0/ 5 HCC Types 0/15 0/20 0/ 5 HCF 0/10 Types 0/15 VOH Output High Voltage 0/ 5 0/10 0/15 VOL Output Low Voltage 5/0 10/0 15/0 VIH Input High Voltage 0.5/4.5 1/9 4.5/0.5 9/1 0/ 5 HCC Types 0/ 5 0/10 0/15 0/ 5 HCF Types 0/ 5 0/10 0/15 IOL Output Sink Current 0/ 5 HCC Types 0/10 0/15 0/ 5 HCF Types IIH, IIL Input Leakage Current 0/10 0/15 HCC 0/18 Types HCF 0/15 Types Any Input 2.5 4.6 9.5 13.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 0.4 0.5 1.5 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 0/10 VO (V) | IO | (A) V DD (V) 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 5 10 15 5 10 15 5 10 15 18 Any Input 15 -2 - 0.64 - 1.6 - 4.2 - 1.53 - 0.52 - 1.3 - 3.6 0.64 1.6 4.2 0.52 1.3 3.6 0.1 0.3 3.5 7 11 1.5 3 4 - 1.6 - 3.2 - 0. 51 - 1.3 - 3.4 - 0. 44 - 1.1 - 3.0 0.51 1.3 3.4 0.44 1.1 3.0 -1 - 2.6 - 6.8 -1 - 2.6 - 6.8 1 2.6 6.8 1 2.6 6.8 10
-5
Value T Lo w* Min. Max. Min. 5 10 20 100 20 40 80 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 - 1.15 - 0.36 - 0. 9 - 2. 4 - 1. 1 - 0.36 - 0. 9 - 2. 4 0.36 0.9 2.4 0.36 0.9 2.4 0.1 1 1 A mA mA 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 V V 25 C 0.04 0.04 0.04 0.08 0.04 0.04 0.04 5 10 20 100 20 40 80 4.95 9.95 14.95 0.05 0.05 0.05 V V T High* Max. 150 300 600 3000 150 300 600 A Unit Typ. Max. Min.
IL
Quiescent Current
1.5/13.5 < 1 VIL Input Low Voltage
13.5/1.5 < 1 IOH Output Drive Current
- 1. 36 - 3.2
10-5 0.3 5 7.5
CI
* *
Input Capacitance
pF
TLow = - 55C for HCC device : - 40C for HCF device. THigh = + 125C for HCC device : + 85C for HCF device. The Noise Margin for both "1" and "0" level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 V min. with VDD = 15V.
4/11
HCC/HCF4006B
DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25C, C L = 50pF, R L = 200k, typical temperature coefficient for all V DD values is 0.3%/C, all input rise and fall times = 20ns)
Symbol Parameter Test Conditions V D D (V) Min. 5 10 15 t THL , t T L H Transition Time 5 10 15 tw Clock Pulse Width 5 10 15 t r, tf Clock Input Rise or Fall Time* 5 10 15 t se t u p Data Setup Time 5 10 15 f max Maximum Clock Input Frequency 5 10 15 Value Typ. 200 100 80 100 50 40 100 45 30 15 15 15 50 25 20 5 12 16 MHz ns s ns ns ns Max. Unit
t P L H , t P HL Propagation Delay Time
* If more than unit is cascade trCL should be made less than or equal to the sum of the transition time and the fixed propagation delay of the d output of the driving stage for the estimated capacitive load.
Typical Output Low (sink) Current Characteristics.
Minimum Output Low (sink) Current Characteristics.
5/11
HCC/HCF4006B
Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics.
TEST CIRCUITS Quiescent Device Current. Input Voltage.
Input Current.
6/11
HCC/HCF4006B
Plastic DIP14 MECHANICAL DATA
mm MIN. a1 B b b1 D E e e3 F I L Z 1.27 3.3 2.54 0.050 8.5 2.54 15.24 7.1 5.1 0.130 0.100 0.51 1.39 0.5 0.25 20 0.335 0.100 0.600 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.055 0.020 0.010 0.787 0.065 inch TYP. MAX.
DIM.
P001A
7/11
HCC/HCF4006B
Ceramic DIP14/1 MECHANICAL DATA
mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 1.52 0.38 15.24 2.79 0.55 1.52 0.31 2.54 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.060 3.3 0.015 0.600 0.110 0.022 0.060 0.012 0.100 0.406 0.317 0.200 TYP. MAX. 20 7.0 0.130 MIN. inch TYP. MAX. 0.787 0.276
DIM.
P053C
8/11
HCC/HCF4006B
SO14 MECHANICAL DATA
DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 1.27 7.62 4.0 5.3 1.27 0.68 8 (max.) 0.149 0.181 0.019 8.75 6.2 0.35 0.19 0.5 45 (typ.) 0.336 0.228 0.050 0.300 0.157 0.208 0.050 0.026 0.344 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010
P013G
9/11
HCC/HCF4006B
PLCC20 MECHANICAL DATA
mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180
DIM.
P027A
10/11
HCC/HCF4006B
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A
11/11

▲Up To Search▲

Price & Availability of HCF4006B

	To Download HCF4006B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .